Intelligent Manometers Mano Gauge / Mano Record / Mano Cali

This is a highly accurate microprocessor-controlled pressure measuring instrument. SensoBrainTM, a KELLER-designed low power signal processor, transmits the signals of the pressure- and temperature sensor to the microprocessor, which digitally compensates the sensor data. This mathematical modelling of the pressure sensor virtually eliminates all errors over a wide temperature range. All KELLER- and KAVLICO-sensors are compatible with the electronics of the Intelligent Manometers.

Mano Gauge and Mano Record also available in EEx ia-version.



Mano Gauge (Basic Version)

Display of: Pressure, Pressure Unit, Temperature, Elapsed Time (Alternative: Pressure, Pressure Unit, Max.- and Min. Value)

All functions are executed with the front key of the instrument. It allows the display to be set to zero and to change the measuring cycle for prolonged battery life.
Two pressure sensors can be connected to the Mano Gauge (optional).

Analog outputs can be provided 4...20 mA or 0...10 V (optional).



Mano Record (Mano Gauge plus data recording)

Based on the Mano Gauge, the Mano Record records and stores the measured values. The front key is used to select which data shall be displayed and stored, and to set the recording interval and the number of readings (memory for 16'000 or optionally 32'000 readings). The read-out of the stored data is via RS 232 serial interface (Logger Software and K101 cable available as option).



Mano Cali (Calibrator Version plus data recording)

In the basic mode, the Mano Cali displays: Pressure, Pressure Unit, Max.- and Min. Values. Units are selected via the front key (bar, PSI, kPa, MPa,). Mano Cali also incorporates the functions TARA (sets a new temporary zero reference), LEAK (measures a pressure change over a programmable time) and RES (reduces the standard resolution by factor 10).
A seperate HOLD-key on the instrument freezes the reading. This instrument has a memory for 960 or optionally 8100 readings.

Pressure Ranges 30 mbar...1000 bar

(-1) 2...700 bar Mano Gauge/Record

Mano Cali
Total Accuracy typ. ± 0,1%

typ. ± 0,05 % Mano Gauge/Record

Mano Cali

LOGGER

The Logger-Software allows the read-out of the stored data from the Intelligent Manometer. The data transfer takes place via the serial interface on the PC. The Mano Record / Mano Cali is connected through a cable K101 (supplied with Logger software).
The LOGGER-software offers many further processing possibilities of the read-out data, and meets all the requirements of modern Windows-Software:

- Graphical Display

- Tabulated Display

- Export into other Windows-Programs

- Storage into Files

Информация

Производитель: KELLER (Switzerland)

Артикул производителя: MANO