Isolated, Proportional DC to HV DC Converters

200V to 6kV at 10W

The new FS Series of isolated, proportional DC to high voltage DC converters offers stout design and enhanced features for excellent long-term reliability. Outputs ranging from 200V through 6kV are offered in miniature, cost-effective, PC-mount packages.

Based on EMCO’s proven high-reliability, high voltage power conversion topology, the FS Series boasts a full ten watts of output power for each model and features a low 0.7V turn-on voltage. The output voltage is proportional to the input voltage, from turn on to maximum output voltage, enabling easy control of the high voltage.

EMCO’s proprietary, quasi-sinewave, resonant oscillator produces clean, reliable high voltage with inherently low ripple, low EMI/RFI, low input ripple current, and low conducted emissions. Additional features such as arc protection, short circuit protection, surge current limiting, and over-temperature protection are available.

APPLICATIONS

Electrophoresis

Piezo Devices

Capacitor Charging

Mass Spectrometry

Electrostatic Chucks

FEATURES

Output Proportional and Linear to Input <0.7V Turn-on Voltage

SMART FEATURES for Enhanced Reliability:

Over-Temperature Protection with Automatic Shutdown and Error Code

Over-Voltage Protection with Automatic Shutdown and Error Code Output

Disable Pin, TTL Compatible High=Off

No Minimum Load Current Required

Low-Noise, Quasi-Sinewave Oscillator

Inaudible >25kHz Oscillator, Low EMI/RFI

Low Conducted Emissions and Low Input Ripple Current

Stable Operating Frequency Over Entire Operating Range

High Input to Output Galvanic Isolation

Very Low Input/Output Leakage Current: <100nA

Very Low Input/Output Coupling Capacitance: <100pF

Reversible Output Polarity (4kV Modules and Below)

High Efficiency, No Derating Required

Robust Design: Conservative Internal High Voltage Clearance and Voltage Gradient Control for Exceptional Long-Term Reliability

Arc Protection and Short Circuit Protection

Output Surge Current Limited

High Reliability: MTBF > 840,000 Hours per Bellcore TR 332

Excellent Internal Thermal Management

Anodized Aluminum Heatsink Surface

Two Threaded, Blind Inserts Allow for Easy Heatsinking and/or Chassis Mounting Options

Designed to Meet RoHS Directive

OPTIONS

Available in Four Standard Input Voltage Ranges: 0–12, 15, 24, and 28V. (For Other Input/Output Voltages)

Polarity: Choose Negative or Positive Outputs for Models FS50 and FS60

Output Center Tap: Available for Models FS02CT through FS40CT

B Version - Without Enhanced Features (See B Drawing)

Extended Operating Temperature: -55 ºC to +85 ºC (Case) (-T Option)

Extended Environmental Screening and Burn-in Available

Производитель: Emco High Voltage

Паспорт изделия: Скачать (993 Кб)