SIX INDEPENDENT -200V TO +200V OUTPUTS

MS0.2MZZ065 MODULE

Applications

Beam steering
Focus & bias supplies
Deflector plates
Electron guns & ion beams


This power supply provides six outputs each separately programmable from -200V to +200V. It is intended for steering, focusing & biasing of electron & ion beam applications. Please consult the factory for special variants of this supply including high speed versions.

ELECTRICAL SPECIFICATION
Input voltage:
+24V d.c. ±0.5V at 0.5A
+15V d.c. ±0.5V at 0.05A. & -15V d.c ±0.5V at 0.05A

Output Voltage:
-200V to +200V controlled by -10V to +10V analogue signal (each channel).

Output current:
100uA per channel.

Control:
-10V gives -200V ±2%, +10V gives +200V ±2%

Speed:
To be defined.

Ripple:
Less than 25mV peak to peak, ripple frequency 50 kHz.

Load regulation:
Less than 100ppm.

Line regulation:
Less than 100ppm.

Temperature co-efficient:
25ppm per °C.

Output monitor:
-8V to +8V represents -200V to +200V ±5% on the corresponding output.

Operating temperature:
0 °C to +45 °C

Storage Temperature:
-35°C to +85°C





Mechanical Specification
Size:
210 x 114 x 47mm, 4 stud fixing.

Input connector:
40 way IDC header, 0.05" pitch, straight latching, bump/clip polarised (Thomas & Betts 636-4034ES). Mating connector supplied.

Output connector:
QM 12 way socket, right angle pcb mounting (Burndy SMS12GE5).

Environmental Conditions :
Indoor use only, Altitude up to 2000m.

Информация

Производитель: APPLIED KILOVOLTS (UK)

Артикул производителя: MS0.2MZZ065